EMB-2230

NXP i.MX6 ARM Cortex A9 Pico-ITX Embedded Board with CAN bus, POE, LVDS, MIPI DSI and CSI Support.

The EMB-2230 is a Pico-ITX (100x 72mm) industrial motherboard based on NXP i.MX6 ARM application processor. The board features a Power over Ethernet (PoE) ready Gigabit Ethernet port, on-board WiFi/BT, multiple LCD panel display interfaces support, and full set of I/Os including RS-232/485, CAN bus, digital IO and more.

Key Features

  • NXP i.MX6 1 GHz Dual-Lite or Quad Core Processor
  • One Gigabit Ethernet ports, one WiFi/Bluetooth module
  • Build-in POE (Power over Ethernet) option
  • On-board RAM, iNAND flash and micro SD slot
  • LVDS, MIPI DSI for LCD panel, built-in I2C touch panel support
  • Ultra small form factor and ultra slim configuration option
  • Rich I/O with RS-232/485, I2C, GPIOs and USB 2.0 ports

Built for Industrial Applications

Targeted to satisfy diverse applications demanding a robust and compact computing platform in industrial environments with built-in reliable communication interfaces like RS-485, RS-232, CAN Bus and more.

Ultra Slim Profile

Use Micro HDMI, mini USB and FPC connectors to provide an ultra slim board configuration, the perfect choice for touch panel PC, all-in-one (AIO) PCs, HMI and tablet replacement computer and other slimline builds.

Single Point Touch Screen Connector

The EMB-2230 i.MX6 embedded board integrates 24bit LVDS, power, backlight control and touch panel interface all in one FPC connector to give developers fast, convenient and simplified solutions for industrial and embedded touch panel applications.

40 Pin Expansion

This i.MX6 embedded board provides a Raspberry Pi like 40-Pin expansion header tweaked for industrial applications with PCIe, configurations of CAN, RS-232, UART, SPI, I2C, POE power input and multiple GPIOs.

Add-On Module for GbE

Works seamlessly with the 40-pin expansion header to add a second Ethernet port, 9-36V wide range voltage power input, light bars LED control, ambient sensor and GPIO functions.

PoE Power Module

Provides Power over Ethernet (PoE) IEEE 802.3af or 802.3at (PoE+) standards power input for the board and LCD panel to make installing or large roll-out of POE touch panel PC and IoT devices much simpler and cheaper.

All-in-One 7″ and 10″ Panel PC

Build on the EMB-2230 embedded ARM board platform with POE or I/O expansion module to help speed up time-to-market. See our POE enabled touch panel PC PPC-4207 and PPC-4210.

*Specifications are representative. Specific product technology may be different than indicated.

Platform ARM Cortex A9
ProcessorNXP i.MX 6 Dual Lite or Quad-core @1GHz
System Memory Onboard 1GB DDR3
Ethernet1 x 10/100/1000 Mbps GbE with POE option, 1 x 10/100/1000 Mbps PCIe GbE (option with add-on card)
Wireless1x WiFi/Bluetooth module
Display Interface1x micro HDMI
LCD Interface 1x 24bit LVDS and 1x MIPI DSI for 7”, 8”, 10.1” and other size LCD panel
Display Resolution HDMI – 1920x 1080, LVDS – 1920x 1080
Expansion1x 40pin connector with PCIe x1, GPIO, font panel control, POE power input
I/O 1x RS-232/RS-485 terminal block, 1x RS-232 header, 2x USB2.0 Type A, 2x USB2.0 header, 1x micro USB 2.0 OTG, 4+ GPIO, 2x I2C (for TP and MIPI CSI), 1x MIPI CSI, 1x CAN via terminal block
Audio Line-out, MIC-in, headphone, speaker out header (up to 2.1W/CH)
Watchdog timerProgrammable timer system reset
CoolingFanless
Power Input5V DC header or POE
Form Factor Embedded Pico-ITX standard
Operating Temperature-10 ~ 60°C (32 ~ 140°F)
Storage-40 ~ 85° C (-40 ~ 185° F)
Operating Humidity5% ~ 95% @ 40°C (Non-Condensing)
Dimension100 x 72 mm (3.94” x 2.83”)